Noise Kick FX Limetime Prime Delay/Modulation

The Lime Time delay by noiseKICK FX is a full-fledged echo machine with warm analog-style repeats of (up to around 1000ms), tap tempo and modulation. What makes the Lime Time delay unique is the two modulation options. By choosing the 'de-tune' or 'runaway echo' option via the toggle switch you will have access to either of these by using the secondary non-latching footswitch (middle foot switch) With the toggle in the 'DIP' position the secondary foot switch acts as a sort of detune/vibrato effect. You sound will be at a higher pitch for as long as the foot switch is depressed. The detune switch which allows for some funky and warped tones on the fly! Try depressing the switch as you hit a note or tap the switch to get a faux vibrato sound. Very experimental.

Controls:

• FB (Feedback) – Also called Repeats. This will determine how many repeats come after your original playing. Turing this knob more than halfway (past noon) will cause the circuit to self oscillate causing some weird and interesting tones.
• Level (MIX) – How much delay signal is mixed in with your original clean signal. Turning the knob completely counter clockwise will give no effect. Completely clockwise will allow your repeats to be the same volume as your original signal.
• Time – How long after your original signal the first repeat will play. The max time is around 1000ms. Anything longer than that will produce a degraded tone. This control will be superseded by the tap control if you choose to use it.
• Bounce Back – This knob works in conjunction with the DIP feature. It will control how quickly or slowly the signal comes back 'in tune' once the secondary footswitch is let go.
• Warble – This mixes in a 'dying tape'/chorus/vibrato effect. The rate/speed of the effect will be the same as the speed of the delay. You can double the speed of the warble by using the “DBL WARBLE” toggle.

Toggle Controls:

• DIP/WARP – This will choose which manual modulation feature the MOD foot switch will control.
• Time DBL -- This will double the rate of the repeats relative to your taping or the TIME control.
• Scale – Controls the scale of the repeats relative to your tapping. This is a 3 way toggle (up, middle, down). Choose for ¼ note, dotted 1/8, and 1/8 subdivisions.
• DBL WARBLE – Doubles the rate of the warble effect relative to the time of the delay.

In the 'WARP' position, the toggle switch activates the runaway repeats. By depressing the foot switch this will turn the repeats all the way up, allowing for runaway echo and wooshing sound. Great for building anticipation or making noise.  Effects loop - put any external effect in the built in effects loop and the repeats of the delay will be effected.